By ALLEN MCQUISTON
The Jemez Agency
You should know exactly how to use a fire extinguisher in the event a fire develops and you feel you are safely able to fight it.
Before you are faced with the need to use one, be sure you have the right type of fire extinguisher on hand. It is recommended that only those trained in the proper use of fire extinguishers consider using them when appropriate.
Attack the Fire Using the PASS Method:
- Pull the pin – by pulling the pin, the operating lever should unlock and allow you to discharge the extinguisher.
- Aim low – point the extinguisher hose/nozzle at the base of the fire.
- Squeeze the lever – this should discharge the extinguishing agent. Some extinguishers may have a button or other means of activation.
- Sweep from side to side – while you are aiming at the base of the fire, you should sweep back and forth until the fire is extinguished. If the fire re-ignites, repeat the process.
Remember Additional Safeguards:
- Keep your back to an exit so that there is a viable means of retreating from the fire.
- Stand at least 8 feet from the fire and begin PASS.
- If the fire does not extinguish immediately, leave the fire.
- Have the fire department survey the area to ensure the fire has been extinguished and that there are not concealed areas where a fire could be smoldering. If an extinguisher is used (even partially), it needs to be recharged or replaced.
Fire Extinguisher Maintenance
- Fire extinguishers should be regularly checked to ensure the following:
- The extinguisher is not blocked by furniture, doors or anything that may limit access during an emergency;
- It is properly mounted in the path of an exit and away from heat sources; and
- The pressure is at the recommended level. Your extinguisher may have a gauge that indicates when the pressure is too high or too low.